menu
close
Blog Post

How Much Should You Pay for a Trade Lead?

Published: 12/10/2026 11:03

Sign-up for free for leads in your area & start winning work!

How Much Should You Pay for a Trade Lead?

How Much Should You Pay for a Trade Lead?

How Much Should You Pay for a Trade Lead? The honest answer is that there is no sensible flat rate. A £10 lead can be expensive if it never turns into work, while a £60 lead can be good value if it leads to a profitable bathroom, rewire, extension or roofing job.

The figure that matters is not simply the price shown on a lead platform. It is your total cost to win a paying customer, including lead fees, time spent responding, surveys, quotes, travel, follow up, materials planning and the occasions where the homeowner does not proceed.

For a self employed tradesperson or small firm, lead buying can be a useful way to keep the diary moving, test a new area or supplement referrals. It can also drain cash quickly if you buy the wrong sort of enquiry, respond too slowly, price without discipline or fail to measure results.

This article sets out how to work out a realistic lead budget for your trade, job value and profit margin, how to assess whether a lead is worth pursuing, and where BookaBuilderUK can fit into a broader plan for finding suitable local work.

What you are actually paying for

A trade lead is not a job. It is an opportunity to speak to a homeowner who may need work done. The homeowner may be collecting prices, may not have a clear budget, may be unable to make a decision alone, or may have already contacted several tradespeople.

That does not make leads a bad investment. It means you need to price them as part of a sales process rather than treat every enquiry as guaranteed turnover.

Your true acquisition cost normally includes:

  • The upfront lead fee or membership cost
  • Your time reading the enquiry and deciding whether it fits
  • Phone calls, messages and arranging access
  • Travel, parking and survey time
  • Time producing a written quotation
  • Follow up calls or messages
  • Any discount you give to secure the work
  • The cost of leads that do not convert

A plumber who pays £20 for a local boiler repair lead and wins it after a five minute phone call may have acquired useful work cheaply. A builder who pays £30 for a vague refurbishment enquiry, spends two hours visiting, six hours pricing and never hears back has spent far more than £30.

That is why lead cost should always be judged against likely profit and the amount of sales effort needed, not only against the headline fee.

How Much Should You Pay for a Trade Lead? Start with your numbers

A practical way to set a lead budget is to work backwards from the profit available on a typical job. You need to know three figures: average job value, direct costs and your realistic conversion rate.

Direct costs are the costs that arise because you do that specific job. They can include materials, hired plant, waste removal, subcontract labour, parking, merchant delivery and specialist testing. They do not normally include your general van costs, insurance, phone bill or accountant, although those still need to be recovered through your overall pricing.

Use contribution, not turnover

Turnover is flattering but it does not pay the bills on its own. A £2,000 job with £1,300 of materials and subcontract costs has far less room for lead generation than a £2,000 labour focused job.

For example, consider a small electrical installation job:

Item Example amount
Quoted job value £1,200
Materials £350
Testing and certification costs £50
Apprentice or labour support £180
Travel, parking and consumables £70
Amount left before general overheads, tax and owner drawings £550

Paying £25 to access the enquiry may be acceptable if you have a fair chance of winning it and the scope is clear. Paying £150 in total lead and sales costs would need more careful thought. You still have insurance, tools, vehicle costs, office time, unpaid estimating and your own wages to cover.

A sensible starting point for many small jobs is to aim for customer acquisition costs that are a modest share of the likely job value and an even smaller share of the contribution left after direct costs. The exact proportion varies widely. A repeat customer with future work may justify more. A low margin supply and fit job may justify very little.

Work out your maximum affordable acquisition cost

Use this simple calculation:

Maximum acquisition cost = profit contribution you are prepared to spend winning the work

Choose the amount deliberately. If a job leaves £500 after direct costs, you may decide that spending up to £50 to £75 on lead access, survey time and quoting is acceptable. That is not a rule. It is a business decision based on how full your diary is, whether the work could lead to more jobs, and whether your price already provides enough margin.

For emergency repairs, small fixes and low value call outs, your affordable lead cost is usually much lower. A £90 job cannot carry a £25 lead fee, a 45 minute journey and a 30 minute survey unless it creates additional chargeable work. For larger projects, the lead fee may be less significant, but the time required to quote can become the bigger cost.

Put a value on your estimating time

Many trades businesses forget this part. If you need to earn £45 per hour from productive time to support the business, an hour spent surveying and quoting has a commercial cost of £45 even though no money leaves your bank account.

Suppose you purchase ten enquiries at £18 each. You spend an average of 45 minutes on each, including contact, survey and quotation. At an internal value of £45 per hour, that time costs £337.50.

Cost Amount
Ten lead fees at £18 £180
Seven and a half hours sales time at £45 per hour £337.50
Total acquisition spend £517.50
Jobs won One
Actual cost per won job £517.50

That may be perfectly acceptable for a £5,000 project with good margins. It would be disastrous for a £400 repair. Tracking this figure stops you judging lead sources by instinct alone.

Different job types justify different lead spend

Lead budgets should match the kind of work you are trying to win. There is no reason a roofer pricing storm damage, a decorator looking for room refreshes and a builder pricing a kitchen extension should all use the same approach.

Small repairs and call outs

Examples include leaking taps, minor electrical faults, broken fence panels, replacing a lock, small plaster repairs and gutter clearing. These jobs are often time sensitive and homeowners tend to contact several people quickly.

Keep the cost of winning these jobs tight. A quick response, clear minimum charge and good telephone qualification matter more than a long site visit. Where possible, ask for photos, postcode, availability and a short description before committing to travel.

If the likely value is under £150, avoid spending half a day chasing it. A lead fee of a few pounds may work. A substantial fee plus a lengthy journey generally will not, unless you can group work nearby or the customer has a list of further tasks.

Medium sized planned work

Examples include bathroom repairs, consumer unit replacements, room decorating, patio repairs, fitted storage, boiler replacements where you are appropriately registered, and replacement internal doors.

These jobs often give a better balance between value and sales effort. The homeowner is more likely to need a written quote, and you may need a site visit to price accurately. A lead cost in the tens of pounds can be reasonable if you qualify the enquiry properly and have a disciplined quote process.

Ask what result the homeowner wants, when they hope to start, whether they own the property, whether they have a budget range and whether other trades are involved. You are not trying to interrogate them. You are protecting both sides from an unnecessary visit.

Large projects and specialist work

Extensions, loft work, full refurbishments, major landscaping, roofing replacements, drainage issues and substantial commercial work can support more sales cost. They can also swallow days of unpaid estimating if you are careless.

For these projects, do not quote from a vague paragraph and a few photos. Confirm the brief, establish who is making the decision, identify planning or building control implications, and make sure the customer understands what is excluded.

For larger work, you may decide to charge for detailed design, specification or survey work, with the amount credited against the job if you are appointed. Be transparent before doing it. A homeowner should understand exactly what they receive for that fee.

Calculate your lead conversion rate before increasing spend

Your conversion rate is the percentage of qualified leads that become paying jobs. You do not need complicated software to track it. A spreadsheet, diary note or job management system is enough if you update it consistently.

Record each enquiry under simple stages:

  • Lead received
  • Contact made
  • Qualified as suitable
  • Survey booked
  • Quote sent
  • Job won
  • Job lost
  • Reason lost if known

After a month or two, patterns become clearer. You may find that leads in one postcode rarely proceed because travel makes you expensive. You may notice that bathroom enquiries convert well but small repair leads do not. You may discover that you win more work when you call within ten minutes rather than replying later that evening.

Do not assume all lost jobs were lost on price. Homeowners often choose the person who replied first, explained the process clearly, turned up as agreed, provided a professional written quote or gave a realistic start date.

For practical guidance on speed, wording and follow up, read How to Respond to Leads Like a Pro and Win More Work. A better response process can improve the value you get from the same lead budget.

Compare lead sources fairly

Do not compare one platform solely by the cost of an individual enquiry and another by a monthly subscription. Compare the total cost per profitable job over a meaningful period.

Use the same questions for every source:

  • Are the enquiries in the areas you genuinely serve?
  • Do the jobs fit your trade, skill level and preferred job size?
  • How clear is the work description?
  • Can you establish whether the homeowner is serious before investing hours?
  • How many jobs do you actually win?
  • What is the average job value and gross profit?
  • How much time do you spend on enquiries that go nowhere?
  • Do completed jobs produce reviews, repeat work or referrals?

BookaBuilderUK can form part of that mix by giving tradespeople another route to get in front of homeowners seeking real home improvement work. Treat any new source as a channel to test properly, not as a replacement for referrals, merchant relationships, signage, repeat customers or your own local reputation.

Keep separate records for each source. If you mix every enquiry into one list, you will not know whether paid leads, local search, word of mouth or social media are producing the best work.

If you are trying to build a healthier pipeline beyond lead platforms, How to Get More Local Jobs as a Tradesperson in 2025 covers practical ways to attract work closer to home.

Qualify leads before you spend money visiting

A good lead is not always a large lead. It is a job that fits your business and has enough information to make a sensible decision about the next step.

Before booking a survey, aim to confirm:

  • The full address and postcode
  • The type and scale of work required
  • Photos or video where useful
  • Whether the property is owner occupied, rented or managed by an agent
  • Whether the customer can approve the work
  • The desired timescale
  • Whether there are access, parking, tenant or pet considerations
  • Whether other trades, permissions or specialist reports are needed
  • Their expectations around budget, where appropriate

There is a difference between asking about budget professionally and asking “what have you got to spend?” too early. A better approach is to explain that similar jobs can vary widely depending on materials, access and finish, then ask whether they have a range in mind. It helps you avoid designing a £10,000 solution for a customer expecting £3,000 work.

Be careful with vague emergency enquiries. Ask enough questions to assess whether there is an immediate safety risk. Electrical work must be carried out by a competent person, and gas work must only be undertaken by someone appropriately registered with the Gas Safe Register. Do not promise a fix before seeing the issue.

Set prices that leave room for lead generation

If your quoted price barely covers labour and materials, every lead fee will feel expensive. The underlying problem may be pricing rather than marketing.

Your rates need to recover more than the hours physically spent on site. They must contribute towards vehicle costs, fuel, insurance, tools, calibration, training, accountancy, software, advertising, sick days, holidays, time spent quoting and bad debt.

Build these costs into your charge out rate or project margin. Do not add random amounts after receiving a lead just because you paid to access it. The customer is buying a result, not reimbursing your sales costs.

For VAT registered businesses, assess job profitability on a net basis. VAT collected from customers is not income available to spend. If your taxable turnover approaches the registration threshold, check the current rules and threshold on GOV.UK VAT registration. Getting caught out by VAT can wipe out the margin you thought you had on a run of jobs.

Lead fees, advertising and business promotion costs may be allowable business expenses where they are incurred wholly and exclusively for the business. Keep invoices and clear records, and check the current guidance on claiming business expenses from HMRC or speak to your accountant.

Common mistakes that make leads unprofitable

Buying every enquiry because the diary feels quiet

A quiet week can make any lead look attractive. That is exactly when you need a minimum standard. Decide the areas, trades, job values and work types you want before you see the enquiry. Otherwise you can fill your diary with low margin jobs that prevent you taking better work.

Responding too slowly

Homeowners with an active problem often contact several tradespeople. If you reply the following day, somebody else may already have booked a visit. Set up a routine for checking leads and replying during working hours. If you cannot call, send a short message confirming you have seen the enquiry and stating when you will call.

Giving a fixed price without enough information

Photos are useful but they do not show every issue. Hidden damage, poor access, old wiring, uneven walls, drainage problems and previous poor work can all change the cost. Give a guide price only where appropriate, explain the assumptions and confirm that the final quote follows inspection.

Failing to set out exclusions

A quote should say what is included, what is excluded, payment stages, the validity period, expected start date, likely duration and how variations will be handled. This protects your margin and reduces disputes.

For work agreed in a customer’s home, online or by phone, consumer cancellation rules may apply depending on how and where the contract is made. Read the official guidance on online and distance selling for businesses. If the customer asks for work to start during a cancellation period, make sure the paperwork deals with that correctly.

Not following up

A polite follow up is not pushy. If your quote has been sent and the customer has not responded after a few days, ask whether they have any questions or need anything clarified. One follow up is sensible. Repeated chasing is rarely productive.

Confusing busy turnover with good work

A full diary can still produce poor cash flow if deposits are too small, payment terms are unclear, jobs run over and margins are thin. Choose leads that fit your operational capacity. A profitable job completed well is more valuable than three rushed jobs that generate complaints and callbacks.

Protect cash flow after you win the job

The lead cost is only the first cash commitment. Once you win work, you may need to buy materials, book subcontractors or hire equipment before receiving much from the customer.

For larger domestic jobs, agree payment stages before starting. The right structure depends on the job, materials required and your confidence in the customer, but it should be clear, reasonable and recorded in writing. Avoid funding a major project from your own overdraft because you were reluctant to discuss payments early.

Do not treat a deposit as profit. Ring fence enough to cover the materials or labour it is intended to fund. Send invoices promptly at each agreed stage and chase overdue amounts professionally. If a customer disputes an item, deal with the issue quickly and keep written records of what was agreed.

Strong cash flow gives you more freedom to invest in good leads without panicking about the next week’s fuel bill.

A practical 30 day lead buying plan

Rather than spending heavily at once, run a controlled test. This gives you useful evidence without putting unnecessary pressure on cash flow.

  1. Choose your target work. Write down the three to five job types you most want, the postcodes you will cover and the minimum job value that makes a visit worthwhile.
  2. Set a monthly test budget. Use money you can afford to invest without affecting wages, tax, supplier accounts or existing commitments.
  3. Create a lead record. Track source, fee, date, postcode, job type, response time, quote value, outcome and reason lost.
  4. Prepare a response template. Keep it human and tailored, but have a reliable structure for asking for photos, access details and a suitable time to call.
  5. Qualify before travelling. Avoid booking every survey automatically. Confirm that the work is suitable and the customer is ready to discuss it properly.
  6. Quote quickly and clearly. Aim to send a written quote while the discussion is still fresh, provided you have enough information to price safely.
  7. Review every week. Check which enquiries are worth pursuing and which are wasting time.
  8. Review after 30 days. Calculate total acquisition cost, jobs won, revenue booked, expected gross profit and unpaid estimating time.

If the results are promising, increase carefully. If they are poor, do not simply buy more leads. Improve your qualification, response time, pricing or target area first.

Paid search can also be useful for trades businesses that have a clear service area, strong landing pages and a system for answering calls quickly. It requires its own budget and tracking discipline. For more on that route, see How investing in PPC Can Increase Your Business.

Build a lead mix rather than relying on one source

The strongest small trade businesses usually avoid relying entirely on one lead source. Referrals and repeat customers are often highly profitable, but they may not provide enough work at every stage of growth. Paid leads can help fill gaps, test demand or establish a foothold in a new locality.

A balanced approach might include repeat customers, recommendations, local partnerships, a well maintained online presence, paid advertising where it is measurable, and platforms that introduce you to homeowners with active projects.

BookaBuilderUK is relevant as one additional channel for tradespeople who want opportunities to connect with homeowners seeking work. The commercial discipline remains the same whichever source you use: respond professionally, qualify properly, price for profit and track the outcome.

FAQ

How Much Should You Pay for a Trade Lead if you are a sole trader?

Pay only what your likely profit can support after allowing for your time. For a small repair job, the sensible cost may be very low because travel and quoting can consume the margin. For a larger planned project, paying more can be justified if the job has healthy profit and the homeowner is a good fit.

Start by tracking your actual cost per won job, not just cost per enquiry. Include lead fees, travel and the value of your survey and quoting time. Review after at least several enquiries, because one job alone can give a misleading picture.

Is paying for trade leads better than relying on referrals?

Referrals are usually valuable because trust has already been transferred from one customer to another. They should remain a priority. Paid leads can still be useful because they put you in front of homeowners who may not already know somebody who can recommend a trade.

The best approach is usually to use paid leads as part of a wider pipeline, rather than depend entirely on referrals or entirely on purchased enquiries.

What is a good conversion rate for trade leads?

There is no universal good conversion rate. It varies by trade, job value, location, speed of response, homeowner urgency, competition, price point and how carefully the enquiries are qualified. A high conversion rate on tiny low margin jobs can be less valuable than a lower conversion rate on larger profitable work.

Measure your own performance by job type and source. Focus on whether your cost per won job leaves enough contribution after direct costs, rather than comparing your figures with unverified claims from other businesses.

Should I pay to quote for work?

For routine domestic work, many tradespeople provide quotations without a separate charge. For complex projects requiring detailed measurement, design, specification work, structural input or several hours of estimating, a paid survey or planning fee can be reasonable.

Tell the customer before booking the appointment, state what the fee covers and explain whether it will be credited against the final job if you are appointed. Do not surprise a homeowner with a charge after the visit.

How can I tell whether a trade lead is genuine?

Look for a clear address area, a realistic description of the work, sensible communication and a homeowner willing to answer basic questions. Confirm the work needed, timescale, access and who will make the decision. Ask for photos where they would help.

Be cautious where the scope keeps changing, the customer refuses to provide basic details, the price expectation is plainly unrealistic, or they pressure you to start without confirming what is required. Trust your judgement, but remain professional and respectful.

Final Thoughts

The right lead price is the one that produces profitable, manageable work after you account for every cost involved in winning it. Set clear criteria, respond quickly, qualify properly, quote with enough detail and keep records. That turns lead buying from a gamble into a measurable business decision.

If you want another route to get in front of homeowners looking for trade work, visit BookaBuilderUK and assess each opportunity against your job fit, margin and available capacity.



Sign-up free with BookABuilderUK

Sign-up for free today!

Create your business profile for free to see job leads in your area and start winning work today.





Search tradespeople
© Copyright. BookaBuilderUK.com. 2026. All Rights Reserved.
Sign-up free with BookABuilderUK

Sign-up for free today!

Create your business profile for free to see job leads in your area and start winning work today.