When Should a Tradesperson Put Their Prices Up?
Knowing when should a tradesperson put their prices up is one of the hardest commercial decisions in a small trade business. Raise prices too soon, or explain the change badly, and you may lose enquiries you could have won. Leave prices unchanged for too long and you can end up fully booked, exhausted and still short of cash after materials, fuel, insurance and tax.
A price increase is not simply about charging customers more. It is about protecting the quality of your work, maintaining a sensible profit and making sure your business can afford to operate properly. If your current prices only work when nothing goes wrong, they are probably too low.
Most homeowners understand that skilled labour, materials and running costs have a price. Problems usually arise where a quotation is unclear, the figure changes during the job without agreement, or the work does not match what was promised. Professional communication and accurate written quotations make higher prices easier to support.
When Should a Tradesperson Put Their Prices Up?
There is rarely one perfect date to increase your prices. The right time depends on your workload, costs, profit, local market and the type of work you want to win. However, there are clear warning signs that your existing rates no longer support the business.
You are busy but not making enough money
Being busy is not the same as being profitable. A full diary can hide poor pricing, particularly if jobs regularly overrun or you complete small extras without charging for them.
For example, a self employed plumber might charge £220 for a day’s labour. After fuel, van costs, insurance, tools, phone costs, accountancy, advertising, tax and pension contributions, the amount left may be far lower than expected. If that figure only works by completing five or six paid days every week, the rate is unlikely to be sustainable.
Review the money you have drawn from the business over the previous three to six months. If cash is constantly tight despite a solid workload, your rates may need to rise before you accept more work.
Your costs have risen materially
Trade businesses absorb many costs that homeowners do not see. These include vehicle finance, repairs, fuel, public liability insurance, professional memberships, waste disposal, software, tools, PPE, training, merchant account fees and certification renewals.
Materials matter too, but they should not be the only reason for a price increase. Their cost can change regularly, so update material allowances for each quotation and review labour rates separately.
If your van insurance has risen by £350 a year, fuel costs more and tools need replacing more frequently, that money must be recovered. A measured labour rate increase across suitable jobs is usually clearer than adding unexplained charges to individual invoices.
You are winning nearly every quote
Winning almost every job is not always good news. It can mean that your prices are below the market, your allowances are too generous or you are attracting customers who decide mainly on the lowest figure.
If most homeowners accept immediately while you are booked several weeks ahead, test a controlled increase on new enquiries. You could raise your labour rate, minimum charge or margin on smaller jobs, then monitor the response.
A sensible starting point might be an increase of 5 per cent to 10 per cent. Review the results after enough quotations have been issued to form a useful picture.
Your diary is too full to quote properly
If you are rushing surveys, replying late and missing calls, you have a capacity problem. Higher pricing can help you take on fewer, better suited jobs while giving each customer a more reliable service.
It can also create room to plan work, order materials, supervise staff or subcontractors and deal with paperwork. This reduces callbacks, disputed extras and cash flow problems.
For practical advice on handling first contact and avoiding slow replies that cost work, read How to Respond to Leads Like a Pro and Win More Work.
You are taking on work you no longer want
Many tradespeople start by saying yes to almost everything. That is understandable early on, but it can become a trap. You may be highly skilled at bathroom installations, rewires, extensions, roofing repairs or heating work, yet spend too much time on low value call outs that disrupt your week.
Increasing your minimum charge, call out fee or day rate can filter work that does not suit the business. Smaller jobs still need to cover travel, diagnosis and the opportunity cost of turning down other work.
Start with your numbers, not your competitors
Competitor rates provide useful context, but they cannot tell you what your business needs to charge. Another local firm may own its van outright, have lower overheads, be VAT registered, employ an apprentice or specialise in repeat commercial work. Its price may not suit your circumstances.
Work out your minimum viable rate before deciding your selling price.
Calculate the cost of running your business
List every regular annual or monthly cost, including expenses you pay personally to keep the business operating.
- Van finance, repairs, servicing, tyres, road tax, fuel and insurance
- Public liability, employer’s liability where required, tools and equipment cover
- Tools, consumables, PPE, ladders, access equipment and calibration
- Accountancy, bookkeeping, bank charges and card payment fees
- Mobile phone, internet, website, workwear and advertising
- Trade memberships, licences, qualifications, training and certification
- Waste disposal, parking, congestion charges and delivery costs
- Holiday, sickness, pension contributions and periods without work
Then estimate the number of chargeable days you can realistically sell each year. A sole trader may work 230 days, but cannot usually invoice for every one. Bank holidays, annual leave, sickness, training, surveys, material collection and gaps between jobs all reduce billable capacity.
Many small firms find that 170 to 200 chargeable days is a more realistic planning figure. Your own total will vary, but it should be based on actual working patterns rather than an ideal year.
A simple day rate example
Suppose your annual business overheads are £18,000. You want to pay yourself £42,000 before personal tax, retain £5,000 for replacing equipment and allow £5,000 for profit and unexpected costs. That is £70,000 to generate before direct job materials.
If you expect 180 chargeable days, the calculation is:
£70,000 divided by 180 equals about £389 per chargeable day.
That does not mean every job must be quoted at exactly £389 per day. Fixed price work, specialist skills, risk, access and materials all affect the final figure. It does show why a £200 day rate may not be sufficient once the business is properly costed.
For wider context on labour pricing, see Builder Day Rates:. Use guides as a reference point, then apply your own costs, location, experience and workload.
| Cost area | Example annual amount | Why it affects your price |
|---|---|---|
| Van, fuel and insurance | £7,000 | Travel and carrying materials are part of delivering the service |
| Tools, PPE and consumables | £3,000 | Tools wear out and safety equipment needs replacing |
| Admin, accountancy and phone | £2,500 | These costs must be recovered through chargeable work |
| Training and memberships | £1,500 | Competence and certification support quality and compliance |
| Advertising and customer acquisition | £2,000 | Finding suitable work requires time or marketing expenditure |
| Contingency and profit | Variable | Provides resilience for delays, replacement equipment and growth |
These figures are examples, not a pricing rule. A London electrician, rural roofer and small building firm will have very different costs. The useful exercise is to make your own figures visible.
Choose the right way to increase prices
You do not always need to raise every rate by the same amount. The best method depends on the work you carry out and how customers buy it.
Increase your hourly or day rate
This is straightforward for reactive work, fault finding, maintenance and labour only jobs. If you charge £60 an hour and your costs have moved up, increasing to £65 or £70 may be easier to explain than adding vague surcharges.
Make sure the customer understands whether travel, parking, diagnosis, collection time, materials and VAT are included. Hourly pricing can cause disputes if the basis for calculating labour time is unclear.
Raise your minimum charge
Minimum charges are particularly useful for small jobs. A one hour repair can occupy much more time once travel, parking, diagnosis, collecting a part and invoicing are included.
For instance, a £75 minimum charge may suit a nearby minor repair. If you travel 25 miles, inspect the issue safely and potentially return with parts, £75 may not cover the time involved. A £95 or £120 minimum could be commercially sound, provided you state what it includes.
Be specific. “Minimum attendance charge covering the first hour on site” is clearer than “call out fee”. Show emergency and out of hours rates separately before the customer agrees.
Improve your fixed price quoting
Fixed prices can be more profitable than day rates where you know the work well and estimate accurately. They also give homeowners greater certainty. The risk is missing labour, access requirements, waste, materials or likely remedial work.
State what is included, what is excluded, the expected duration, payment stages and what will happen if hidden issues are found. This allows you to price the whole responsibility involved rather than just the visible time on site.
Customers often compare the headline total, so help them compare like for like. The article What to look for on my job quote is useful for understanding the details homeowners should expect to see and why clarity helps prevent disputes.
Review material margins and purchasing
Charging only the merchant invoice cost for materials means you carry the procurement and warranty risk without recovering it. You spend time sourcing, collecting, checking, storing and returning items. Damaged goods and supplier delays can also affect the job.
There is no universal materials margin. The appropriate figure depends on the value of the goods, credit terms, risk and type of project. Some firms apply a percentage uplift, while others include procurement and risk within the fixed price.
Describe the arrangement honestly. “Supply and installation of materials” is generally clearer than presenting a marked up trade invoice as though it were a direct cost passed to the customer.
Charge properly for specialist work and risk
Not all labour hours carry the same responsibility. Gas work, electrical work, structural alterations, roofing at height, complex fault finding, heritage work and confined spaces involve different levels of skill, liability, equipment and risk.
Price for that responsibility, not just time holding tools. Only undertake regulated work that you are competent and authorised to complete. Domestic gas work must be carried out by an appropriately registered engineer. Customers can check engineers through the Gas Safe Register.
Health and safety duties also apply on small domestic projects. The Health and Safety Executive provides guidance for construction work, including risk management, work at height and site safety.
How much should a price increase be?
A modest, regular review is usually easier to manage than freezing prices for several years and then making a large correction. Many trade businesses review labour rates annually and check material costs more frequently.
A 5 per cent increase on a £400 labour element adds £20. A 10 per cent increase adds £40. Across a year, this can contribute towards insurance, equipment, training and the margin needed to deal with problems properly.
Where your rates are clearly too low, a larger rise may be justified. If your day rate is £180 and your cost calculation shows it needs to be nearer £300, increasing it by £10 will prolong the problem. You could move new work to £250, monitor results and review the rate again after a suitable number of quotations.
Consider these factors before choosing the percentage:
- Your current quotation conversion rate
- Your booked workload for the next four to eight weeks
- Whether the increase applies to labour, materials or both
- Whether you are VAT registered or approaching the registration threshold
- The value provided through skill, reliability, communication and guarantees
- Whether your target work is domestic, commercial, planned or emergency work
- The profitability of recently completed jobs
Do not change agreed prices without a proper process
A price increase should normally apply to new enquiries and quotations. If a customer has accepted your written fixed price, changing it because you later decide the job is underpriced can damage trust and create a dispute.
Genuine variations can be charged where the customer changes the requirements or hidden conditions arise. Explain the issue, give a written price for the additional work and obtain approval before proceeding where possible.
For example, you may quote to replace kitchen units and then find damaged flooring, unsafe wiring or a leaking pipe after removal. Explain what has been found, why it affects the work, the available options and the cost of each one.
Consumer rights and written terms
Domestic customers are protected by consumer law. Services must be carried out with reasonable care and skill, and information you provide about the service can become binding. The government guidance on consumer rights is a useful starting point for businesses dealing directly with consumers.
For work agreed in a customer’s home, by phone or online, the Consumer Contracts Regulations can affect cancellation rights and the information you must provide. Specific rules apply if the homeowner asks you to start during the cancellation period. Take professional advice if you are unsure and ensure your terms reflect how you sell and start work.
Your quote or terms should cover:
- Your business name, contact details and relevant registration details
- A clear description of the work and materials included
- Exclusions, assumptions and customer responsibilities
- Whether the price includes VAT
- Payment amounts and due dates
- Deposit arrangements where appropriate
- How variations and unforeseen work will be approved
- Expected start date and estimated duration where available
- Guarantee information and manufacturer warranties where relevant
- Your cancellation and complaint process
If you are VAT registered, you must account for VAT correctly and issue invoices containing the required information. If you are approaching compulsory registration, plan how VAT will affect your prices and customers. HMRC explains VAT registration requirements and current thresholds.
How to tell customers your prices have increased
You do not need to apologise for charging a sustainable rate. You do need to communicate clearly and consistently.
For new enquiries, simply issue your current quotation. There is no need to discuss what your rate was six months ago.
For existing customers, particularly landlords, property managers or repeat homeowners, give reasonable notice if regular rates are changing. A short email works well.
From 1 May, our standard labour rates will be reviewed to reflect increases in operating costs and the time required to maintain our service standards. Any quotations accepted before that date will remain valid in line with their stated terms. Please contact us if you would like to discuss planned work before the new rates take effect.
This is professional and factual. Focus on the service you provide rather than blaming merchants, customers or the wider economy.
Answer price objections without immediately discounting
If a customer says another quotation is cheaper, ask what it includes before reducing yours. There may be a genuine difference in specification, materials, access equipment, certification, waste removal, guarantees or timescale.
You can say:
I understand you need to compare costs. My quote includes the listed materials, protection of the work area, waste removal, testing where required and the work described. If you send over the other scope, I can check whether there are any differences.
If another competent business offers an equivalent service for less, you may still decide not to compete. Reducing the specification is often safer than cutting the margin needed to complete the work properly.
Common pricing mistakes that make price rises harder
Charging the same rate for every type of work
A planned bathroom refit, an urgent leak, an occupied renovation and a property maintenance visit should not necessarily be priced in the same way. Urgency, risk, planning, travel and disruption all affect the cost of delivery.
Giving vague verbal figures
A casual “it will be around £500” can quickly become an expectation. If you are providing an estimate, describe it as such and explain what could affect the final amount. Follow up in writing promptly.
Discounting too early
Discounting before the customer has questioned the figure suggests that your first quotation was not firm. If the budget needs to change, consider reducing the scope or using a different specification instead of quietly removing your margin.
Leaving repeat customers on historic rates
Long standing customers are valuable, but their rates should still reflect current costs. Give suitable notice and apply revised pricing to future work.
Taking deposits without matching them to cash needs
For larger projects, a fair deposit or staged payment plan can protect cash flow where materials must be ordered before work starts. State the amounts clearly, link them to costs or completed stages, keep payment records and issue proper invoices.
Do not use customer deposits to cover unrelated business debts. This creates serious risk if a project is delayed or cancelled.
A practical price increase plan for the next 30 days
- Review the last 20 completed jobs. Compare quoted labour, actual hours, materials, travel, extras and final profit.
- List your annual overheads. Use bank statements, insurance renewals, vehicle costs and subscriptions rather than guesswork.
- Set a target chargeable day figure. Allow for holidays, surveys, training and gaps between projects.
- Calculate your minimum day rate. Add overheads, target income, contingency and profit, then divide by chargeable days.
- Choose what to increase. This may be your minimum charge, hourly rate, day rate, fixed price margin or emergency rate.
- Update your quotation template. Make inclusions, exclusions, VAT, payment stages and variations clear.
- Apply the new rate to new enquiries. Leave existing accepted prices in place unless the requirements change.
- Monitor the next 10 to 20 quotes. Track enquiry source, job value, acceptance, reason lost and actual profit.
- Review your customer mix. Focus on work that suits your skills, location, team and cash flow.
- Schedule another review date. A quarterly check on costs and margins prevents pricing from drifting out of date.
Use better work opportunities to support better pricing
Higher prices are easier to maintain when you are not relying on one customer, one contractor or a stream of unsuitable jobs. A consistent approach to finding work gives you more choice about what to quote for.
BookaBuilderUK can form part of that approach by helping tradespeople get in front of homeowners looking for home improvement work. Review the job details, respond promptly, ask relevant questions and concentrate on opportunities that match your trade, service area and preferred job size.
Your profile, photographs, qualifications, customer communication and quotation quality all influence whether a homeowner sees value in your price. Local firms can compete by being clear, responsive and accountable rather than trying to appear like a national company. For more on that point, read How to Compete with National Brands as a Local Tradesperson.
The aim is not to become the most expensive business in the area. It is to create enough suitable opportunities to price responsibly, deliver good work and protect your reputation.
FAQ
When should a tradesperson put their prices up if work is quiet?
Quiet periods do not automatically mean you should keep prices low. Check whether the problem is price, enquiry quality, response speed, location, service offering or seasonal demand. If your current work is unprofitable, reducing prices further will not solve the underlying issue.
You could retain your standard rate while offering a defined lower cost option, such as using a different material specification or grouping nearby jobs to reduce travel. Avoid open ended discounts that set an unrealistic expectation for future work.
Should I increase my day rate or my fixed prices?
Increase the pricing method that reflects how you sell work. Day rates and hourly rates suit maintenance, repairs and uncertain fault finding. Fixed prices suit repeatable work that can be assessed accurately. Many businesses use both.
If fixed price jobs regularly overrun, check your estimating before simply increasing the day rate. Missed labour, access, waste, drying times, material collection or poorly controlled variations may be causing the problem.
How often should a self employed tradesperson review prices?
Review labour pricing at least once a year and check materials on every substantial quotation. For longer projects, state how long the quotation remains valid and whether material prices will be confirmed before ordering.
Review rates after any major change, such as becoming VAT registered, employing someone, buying another vehicle, moving premises, gaining a qualification or changing the type of work you undertake.
Can I charge more for emergency or out of hours work?
Yes, provided the rate is clear before the customer agrees. Emergency work often involves disruption, unsocial hours, additional safety considerations and changes to planned jobs. A higher charge can be reasonable if communicated properly.
Tell the customer the attendance charge, subsequent hourly rate, likely material costs and whether the first hour is included. For safety critical situations, advise them to contact the relevant emergency service or utility provider where necessary.
Will putting prices up make me lose good customers?
Some price sensitive customers may choose a cheaper option. That does not necessarily mean the increase was wrong. Good customers generally value reliable attendance, clear communication, competent work, respectful behaviour and proper paperwork.
Give repeat customers notice where appropriate and make sure your standard of work supports the price. A measured increase may improve cash flow without materially affecting demand.
Final Thoughts
Putting prices up should be a planned business decision based on costs, capacity, profit and the value of your work. Review your figures regularly, communicate changes clearly and monitor how revised rates affect enquiries, conversions and job profitability.
If you want to get in front of homeowners looking for home improvement work, explore the opportunities available through BookaBuilderUK.


